DMKIT
DMKIT includes:	A kit for the common failure on the Mitsubishi DM modules. Each kit contains 4pcs 1000mF 16V high temperature, long life capacitors.

GMAKIT
GMAKIT includes:	GMAKIT contains: 10 pcs of each of the following GMA Series Fast-Acting Fuses: 125 Volt 250 Volt 3.15 Amp GMA-3.15A 4 Amp GMA-4A 5 Amp GMA-5A 6 Amp GMA-6A 8 Amp GMA-8A 10 Amp GMA-10A    1 Amp GMA-1A 1.5 Amp GMA-1.5A 2 Amp GMA-2A 3 Amp GMA-3A

PICOKIT
PICOKIT includes:	6 pcs of each of the following Very Fast Pico Type Fuses: 125 Volt 1 Amp 0251001 2 Amp 0251002 2.5 Amp 025102.5 3 Amp 0251003 3.5 Amp 025103.5 4 Amp 0251004 5 Amp 0251005 7 Amp  0251007

VDRKIT
Used in conjunction with the Sony Repair Kits below
VDRKIT includes:	1pc 1-807-288-11 (black), 2pcs  1-810-053-11 (green) Varistors

KIT1
Used in many Sony power supplies
KIT1 includes:	1pc 2SC4927, 2pcs 2SC4834, 1pc .1Ohm ½ Watt Fusible Resistor

KIT2
Used in Sony 32” TV
KIT2 includes:	1pc 2SC5148, 2pc 2SC4834, 1pc .1 Ohm ½ Watt Fusible Resistor

KIT3
Used in the Sony API chassis
KIT3 includes:	2pcs 2SC4582, 1pc D10SC6MR, 1pc .1Ohm ½ Watt Fusible Resistor

KIT4
Used in Sony 32” TV
KIT4 includes	1pc 2SC5148, 1pc MX0841AB, 1pc .1 Ohm ½ Watt Fusible Resistor

KIT5
Used in PIP Module for Mitsubishi TVs
	KIT5 includes the following surface mounted capacitors -- (105 degrees)      1pc     47µF  16V          3pcs   2.2µF  50V      7pcs  22µF  6.3V      4pcs   10µF  16V          3pcs   1µF  50V          4pcs  4.7µF  35V      2pcs   .47µF  50V         2pcs   .22µF  50V       2pcs  100µF  6.3V

KIT6
Used in PIP Module for Mitsubishi TVs
	LOW PROFILE version of KIT5---includes the same amounts and values of capacitors as in KIT5 but in low profile (5mm) radial leads instead of surface mount.

KIT7
Zenith repair kit
KIT7 includes	1pc STR53041, 1pc 2N4923, 1pc 100µF 50V capacitor, 1pc 22µF 50V capacitor

KIT8
Funai Type Lightning Repair Kit
KIT8 includes	1pc AN8005, 1pc LA6458S (replaces BA718), 1pc 2SB941 and 1pc 7.5V 1W Zener

The following Hitachi Convergence Chassis kits are to be used when a single color has lost either horizontal or vertical control.  Included are the two output devices (either the STK392-110 or STK392-150) as well as the six fusible return resistors.  It is highly recommended to replace all of these parts together, especially the two STKs

KIT9
Repair Kit for Hitachi convergence Chassis DP-14G
KIT9 Includes	2 pcs STK392-110, 1 each of the following 1Watt axial lead fusible resistors:                                   1.5, 1.8, 2.2, 2.7, 3.3, 3.9 Ohms.

KIT10
Repair Kit for Hitachi convergence Chassis DP-14G
KIT10 Includes	2 pcs STK392-150 , 1 each of the following 1W axial lead fusible resistors:                                   1.5, 1.8, 2.2, 2.7, 3.3, 3.9 Ohms.
KIT11
Repair Kit for Hitachi Convergence Chassis       DP-15E
KIT11 Includes	2 pcs STK392-120 , 1 piece each of the following 1 Watt KOA axial lead fusible resistors:                                1.8, 2.7, 3.3, 3.9 Ohms.                               2 pieces each of the following 1 Watt KOA axial lead fusible resistors:                                                                                                         1.5 Ohms

Shopping Cart
Subtotal: $0.00
Edit shopping cart
($15 minimum order US & Canada, $50 minimum order worldwide)

Username:
Password:

Comments? Suggestions? webmaster@bdent.com